Eliminator-lighting UV Disc User Manual

Browse online or download User Manual for Lighting Eliminator-lighting UV Disc. Eliminator Lighting UV Disc User Manual [en] [fr] [de]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
UV Disc
SPECIFICATIONS:
Model: UV Disc
Voltage: 100V-240V 50/60Hz
LEDs: 9 x 1Watt UV LEDs
Beam Angle: 60 Degrees
Power Consumption: 20W
Weight: 4lbs./ 1.75kgs.
Size: 11.25”(L) x 9.5”(W) x
3.25”(H)
Fuse: 1 Amp
Power Cord Daisy Chain: 31 Fixtures Max.
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 1 DMX Channel
Colors: UV
Warranty: 1 Year
CAUTION! Please read and under-
stand these instructions before
installing or operating this unit.
Operating Instructions:
The UV Disc has been tested at the factory, there is no assembly required. The unit is ready to be
plugged into a power outlet. This unit is a 1 channel DMX intelligent UV LED wash. It has 2 operating
mode; Manual mode or DMX mode. The UV Disc can be used as a stand alone unit or in a master-
slave configuration.
Fuse Replacement: Disconnect the unit from its power source. Remove the power cord from the
unit. Once the cord has been removed, you will find that the fuse holder is located inside the power
socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder.
Remove the bad fuse and replace with a new one. The fuse holder also has a holder for a spare fuse.
Power Cord Daisy Chaining: With this feature you can connect the xtures to one another using the
IEC input and output sockets. The quantity that can be connected is 31 xtures maximum. After 31
xtures you will need to use a new power outlet. They must be the same xtures. DO NOT mix xtures.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Caution! Never open unit when in use. Always
disconnect main power before replacing fuse.
Remember to always replace with the exact same
type fuse.
Page view 0
1 2

Summary of Contents

Page 1

UV DiscSPECIFICATIONS: Model: UV DiscVoltage: 100V-240V 50/60HzLEDs: 9 x 1Watt UV LEDsBeam Angle: 60 DegreesPower Consumption: 20WWe

Page 2

Manual Mode:1. Plug the fixture in and press the UP or DOWN buttons until “MAN” is displayed, and press ENTER. 2. Use the UP and DOWN buttons

Comments to this Manuals

No comments